Video Exclusives


Dynamic tire testing

Sentury

XSensor has developed a new high-speed tire sensor to provide tire design and test engineers with accurate footprint pressure data on a timescale of milliseconds during dynamic analysis

Click here to watch the video


Inside Arctic Falls' Indoor Flex facility

Sentury

Raw footage taken in the new test hall at the Swedish proving ground, scheduled to open later this month

Click here to watch the video


Michelin launches recycling campaign

Sentury

The French tire maker has unveiled its ambitious future recycling strategy to ensure that by 2048, all of its tires are manufactured using 80% sustainable materials, and 100% of all end-of-life tires are recycled.

Click here to watch the video


Who developed the Magic Formula Tyre Model widely used for the analysis of tire behavior?

Supplier Spotlight

« back to listing

Cold Jet Europe bvba

Zone 1 Research Park 330
1731 Zellik
Belgium

Email: Info.eu@coldjet.com
Web: http://www.coldjet.com/en/index.php
Tel: +32 13 539 547

 

Fig 1: Cold Jet Tire Edition System

 

Cold Jet is the world leader in Dry Ice Cleaning and Dry Ice Production solutions. Cold Jet has been pioneering the research and development of dry ice blasting and setting the standard for quality, performance and reliability in the field for more than 30 years. Founded on the idea to create cost-effective, environmentally responsible and technologically advanced dry ice solutions, Cold Jet is committed to satisfying the growing worldwide demand for advanced dry ice solutions in new and innovative ways.

 

Fig 2: Tire mold cleaning with dry ice

 

Fig 3: Before and after cleaning

 

In the tire industry, the production process is of great significance. In a global environment that is developing consistently and dynamically, justified processes are essential in terms of production and quality. A critical part of the production process is the maintenance and cleaning of molds. Clean molds and thus availability equals flexibility and has direct impact on the production capacity and production costs. Safety, noise and waste are also key reasons why manufacturers need to review and control the tire production process. We at Cold Jet understand this mission and offer solutions for tire manufacture companies to analyze and control these critical processes. The maintenance process and mold cleaning can be either handled in-house or by a supplier but the most efficient and effective cleaning solution should be selected. Cold Jet also anticipates to the new trend in tire mold cleaning, which is in place, automatically, non-abrasive and cleaning with Dry Ice MicroParticles. Cold Jet’s global support and customer service presence in Europe, America and Asia provides significant benefits for the tire industry.

 

Fig 4: Cleaning with Cold Jet Dry Ice MicroParticles. This solution works well for spring vales and traditional microvents.

 

Fig 5: Cold Jet Dry Ice MicroParticles can reach the smallest geometries in a tire mold, like logos, brand names etc.

 

Fig 6: Automated system solution for tire mold cleaning.

RECEIVE THE
LATEST NEWS


Your email address:



Read Latest Issue

Read Latest Issue

Read Latest Issue

Web Exclusives

Arctic Falls' Indoor Flex facility now operational
The grand opening of Arctic Falls' new Indoor Flex facility, which will offer new tire and vehicle testing possibilities, is scheduled for the end of June.
Read Now

ETRMA consolidates used tire management data for 2016
Data gathered by the ETRMA from 32 countries in the EU shows that 94% of used tires in 2016 were collected and treated
Read Now

BKT in R&D tie-up with Kultevat
Indian tire giant BKT has entered into a research and development partnership with US biotechnology firm Kultevat to further the use of TKS rubber as a substitute for natural rubber
Read Now

Completely truckworthy
Bridgestone America's director for commercial tire development, Mitchel Kritzell, gives an update on the SuperTruck II program
Read Now

Q&A: Sam Visaisouk, CEO, Tyromer
The Retread Tire Association (RTA) speaks with Tyromer CEO, Sam Visaisouk, about the testing of its new tire-derived polymer recycled rubber product in truck and passenger car tires
Read Now


Supplier Spotlight

Supplier SpotlightWe are building a list of leading suppliers covering all aspects of the tire industry. Want to see your company included? Contact olivia.campbell@ukimediaevents.com for more details.

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the tire technology community? We'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to rachel.evans@ukimediaevents.com

Submit Your Recruitment Ad

Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email olivia.campbell@ukimediaevents.com